2006-10-03 10:39:43 +02:00
|
|
|
/*****************************************************************************
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
*
|
2006-10-03 10:39:43 +02:00
|
|
|
* This file is part of Mapnik (c++ mapping toolkit)
|
|
|
|
*
|
|
|
|
* Copyright (C) 2006 Artem Pavlenko
|
|
|
|
*
|
|
|
|
* This library is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
|
|
* License as published by the Free Software Foundation; either
|
|
|
|
* version 2.1 of the License, or (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This library is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
* Lesser General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
|
|
* License along with this library; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
|
|
*
|
|
|
|
*****************************************************************************/
|
2006-10-04 13:22:18 +02:00
|
|
|
// mapnik
|
2007-10-08 19:42:41 +02:00
|
|
|
#include <mapnik/load_map.hpp>
|
|
|
|
|
2009-12-05 04:58:48 +01:00
|
|
|
#include <mapnik/version.hpp>
|
2007-09-25 20:47:12 +02:00
|
|
|
#include <mapnik/image_reader.hpp>
|
2006-10-04 13:22:18 +02:00
|
|
|
#include <mapnik/color.hpp>
|
|
|
|
#include <mapnik/color_factory.hpp>
|
|
|
|
#include <mapnik/filter_factory.hpp>
|
|
|
|
#include <mapnik/layer.hpp>
|
|
|
|
#include <mapnik/datasource_cache.hpp>
|
2007-09-25 20:47:12 +02:00
|
|
|
#include <mapnik/font_engine_freetype.hpp>
|
2008-06-29 12:58:48 +02:00
|
|
|
#include <mapnik/font_set.hpp>
|
2006-10-04 13:22:18 +02:00
|
|
|
|
2007-09-25 20:47:12 +02:00
|
|
|
#include <mapnik/ptree_helpers.hpp>
|
|
|
|
#include <mapnik/libxml2_loader.hpp>
|
2007-10-08 19:42:41 +02:00
|
|
|
|
|
|
|
// boost
|
|
|
|
#include <boost/optional.hpp>
|
|
|
|
#include <boost/algorithm/string.hpp>
|
|
|
|
#include <boost/lexical_cast.hpp>
|
|
|
|
#include <boost/tokenizer.hpp>
|
|
|
|
#include <boost/property_tree/ptree.hpp>
|
|
|
|
#include <boost/property_tree/xml_parser.hpp>
|
|
|
|
#include <boost/static_assert.hpp>
|
2009-05-01 03:59:01 +02:00
|
|
|
#include <boost/filesystem/operations.hpp>
|
|
|
|
|
2007-10-08 19:42:41 +02:00
|
|
|
// stl
|
|
|
|
#include <iostream>
|
2006-10-03 10:39:43 +02:00
|
|
|
|
2006-10-04 13:22:18 +02:00
|
|
|
using boost::lexical_cast;
|
|
|
|
using boost::bad_lexical_cast;
|
|
|
|
using boost::tokenizer;
|
2007-09-25 20:47:12 +02:00
|
|
|
using boost::property_tree::ptree;
|
|
|
|
|
|
|
|
using std::cerr;
|
|
|
|
using std::endl;
|
2006-10-03 10:39:43 +02:00
|
|
|
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
namespace mapnik
|
2006-10-03 10:39:43 +02:00
|
|
|
{
|
2007-10-05 13:27:00 +02:00
|
|
|
using boost::optional;
|
|
|
|
|
|
|
|
class map_parser : boost::noncopyable {
|
|
|
|
public:
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
map_parser( bool strict, std::string const& filename = "" ) :
|
2007-10-05 13:27:00 +02:00
|
|
|
strict_( strict ),
|
2009-05-01 03:59:01 +02:00
|
|
|
filename_( filename ),
|
2009-05-07 01:42:28 +02:00
|
|
|
relative_to_xml_(true),
|
2007-10-05 13:27:00 +02:00
|
|
|
font_manager_(font_engine_) {}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2007-10-05 13:27:00 +02:00
|
|
|
void parse_map( Map & map, ptree const & sty);
|
|
|
|
private:
|
|
|
|
void parse_style( Map & map, ptree const & sty);
|
|
|
|
void parse_layer( Map & map, ptree const & lay);
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2008-06-29 12:58:48 +02:00
|
|
|
void parse_fontset(Map & map, ptree const & fset);
|
|
|
|
void parse_font(FontSet & fset, ptree const & f);
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2007-10-05 13:27:00 +02:00
|
|
|
void parse_rule( feature_type_style & style, ptree const & r);
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2007-10-05 13:27:00 +02:00
|
|
|
void parse_point_symbolizer( rule_type & rule, ptree const & sym);
|
|
|
|
void parse_line_pattern_symbolizer( rule_type & rule, ptree const & sym);
|
|
|
|
void parse_polygon_pattern_symbolizer( rule_type & rule, ptree const & sym);
|
|
|
|
void parse_text_symbolizer( rule_type & rule, ptree const & sym);
|
|
|
|
void parse_shield_symbolizer( rule_type & rule, ptree const & sym);
|
|
|
|
void parse_line_symbolizer( rule_type & rule, ptree const & sym);
|
|
|
|
void parse_polygon_symbolizer( rule_type & rule, ptree const & sym);
|
|
|
|
void parse_building_symbolizer( rule_type & rule, ptree const & sym );
|
2009-03-29 13:05:20 +02:00
|
|
|
void parse_raster_symbolizer( rule_type & rule, ptree const & sym );
|
2007-11-02 13:50:15 +01:00
|
|
|
void parse_markers_symbolizer( rule_type & rule, ptree const & sym );
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2008-06-29 12:58:48 +02:00
|
|
|
void ensure_font_face( const std::string & face_name );
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2009-05-01 03:59:01 +02:00
|
|
|
std::string ensure_relative_to_xml( boost::optional<std::string> opt_path );
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2007-10-05 13:27:00 +02:00
|
|
|
bool strict_;
|
2009-05-01 03:59:01 +02:00
|
|
|
std::string filename_;
|
|
|
|
bool relative_to_xml_;
|
2007-12-17 15:21:04 +01:00
|
|
|
std::map<std::string,parameters> datasource_templates_;
|
2007-10-05 13:27:00 +02:00
|
|
|
freetype_engine font_engine_;
|
|
|
|
face_manager<freetype_engine> font_manager_;
|
2007-12-17 15:21:04 +01:00
|
|
|
std::map<std::string,std::string> file_sources_;
|
2008-06-29 12:58:48 +02:00
|
|
|
std::map<std::string,FontSet> fontsets_;
|
2007-09-25 20:47:12 +02:00
|
|
|
};
|
|
|
|
|
|
|
|
void load_map(Map & map, std::string const& filename, bool strict)
|
2006-10-03 10:39:43 +02:00
|
|
|
{
|
|
|
|
ptree pt;
|
2007-09-25 20:47:12 +02:00
|
|
|
#ifdef HAVE_LIBXML2
|
|
|
|
read_xml2(filename, pt);
|
|
|
|
#else
|
|
|
|
try
|
|
|
|
{
|
|
|
|
read_xml(filename, pt);
|
|
|
|
}
|
|
|
|
catch (const boost::property_tree::xml_parser_error & ex)
|
2006-10-03 10:39:43 +02:00
|
|
|
{
|
2007-09-25 20:47:12 +02:00
|
|
|
throw config_error( ex.what() );
|
2006-10-03 10:39:43 +02:00
|
|
|
}
|
2007-09-25 20:47:12 +02:00
|
|
|
#endif
|
2009-05-01 03:59:01 +02:00
|
|
|
map_parser parser( strict, filename);
|
2009-01-16 00:51:07 +01:00
|
|
|
parser.parse_map(map, pt);
|
|
|
|
}
|
|
|
|
|
2009-12-06 23:18:45 +01:00
|
|
|
void load_map_string(Map & map, std::string const& str, bool strict, std::string const& base_url)
|
2009-01-16 00:51:07 +01:00
|
|
|
{
|
|
|
|
ptree pt;
|
|
|
|
#ifdef HAVE_LIBXML2
|
2009-12-06 23:18:45 +01:00
|
|
|
read_xml2_string(str, pt, base_url);
|
2009-01-16 00:51:07 +01:00
|
|
|
#else
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
try
|
2009-02-18 01:33:26 +01:00
|
|
|
{
|
|
|
|
std::istringstream s(str);
|
|
|
|
read_xml(s,pt);
|
|
|
|
}
|
|
|
|
catch (const boost::property_tree::xml_parser_error & ex)
|
|
|
|
{
|
|
|
|
throw config_error( ex.what() ) ;
|
|
|
|
}
|
2009-01-16 00:51:07 +01:00
|
|
|
#endif
|
2007-09-25 20:47:12 +02:00
|
|
|
|
2009-12-06 23:18:45 +01:00
|
|
|
map_parser parser( strict, base_url);
|
2007-09-25 20:47:12 +02:00
|
|
|
parser.parse_map(map, pt);
|
|
|
|
}
|
|
|
|
|
|
|
|
void map_parser::parse_map( Map & map, ptree const & pt )
|
|
|
|
{
|
|
|
|
try
|
2006-10-03 10:39:43 +02:00
|
|
|
{
|
2007-09-25 20:47:12 +02:00
|
|
|
ptree const & map_node = pt.get_child("Map");
|
|
|
|
|
|
|
|
try
|
|
|
|
{
|
2009-01-14 13:10:24 +01:00
|
|
|
optional<color> bgcolor = get_opt_attr<color>(map_node, "bgcolor");
|
2007-09-25 20:47:12 +02:00
|
|
|
if (bgcolor) {
|
|
|
|
map.set_background( * bgcolor );
|
|
|
|
}
|
|
|
|
|
|
|
|
map.set_srs( get_attr(map_node, "srs", map.srs() ));
|
2008-09-21 12:14:38 +02:00
|
|
|
|
|
|
|
optional<unsigned> buffer_size = get_opt_attr<unsigned>(map_node,"buffer_size");
|
|
|
|
if (buffer_size)
|
|
|
|
{
|
|
|
|
map.set_buffer_size(*buffer_size);
|
|
|
|
}
|
2009-05-01 03:59:01 +02:00
|
|
|
|
|
|
|
// Check if relative paths should be interpreted as relative to/from XML location
|
|
|
|
// Default is true, and map_parser::ensure_relative_to_xml will be called to modify path
|
|
|
|
optional<boolean> paths_from_xml = get_opt_attr<boolean>(map_node, "paths_from_xml");
|
|
|
|
if (paths_from_xml)
|
|
|
|
{
|
|
|
|
relative_to_xml_ = *paths_from_xml;
|
|
|
|
}
|
|
|
|
|
2009-12-05 04:58:48 +01:00
|
|
|
optional<std::string> min_version_string = get_opt_attr<std::string>(map_node, "minimum_version");
|
|
|
|
if (min_version_string)
|
|
|
|
{
|
|
|
|
boost::char_separator<char> sep(".");
|
|
|
|
boost::tokenizer<boost::char_separator<char> > tokens(*min_version_string,sep);
|
|
|
|
unsigned i = 0;
|
|
|
|
bool success = false;
|
|
|
|
int n[3];
|
|
|
|
for (boost::tokenizer<boost::char_separator<char> >::iterator beg=tokens.begin();
|
|
|
|
beg!=tokens.end();++beg)
|
|
|
|
{
|
|
|
|
try
|
|
|
|
{
|
|
|
|
n[i] = boost::lexical_cast<int>(boost::trim_copy(*beg));
|
|
|
|
}
|
|
|
|
catch (boost::bad_lexical_cast & ex)
|
|
|
|
{
|
|
|
|
std::clog << *beg << " : " << ex.what() << "\n";
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (i==2)
|
|
|
|
{
|
|
|
|
success = true;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
++i;
|
|
|
|
}
|
|
|
|
if (success)
|
|
|
|
{
|
|
|
|
int min_version = (n[0] * 100000) + (n[1] * 100) + (n[2]);
|
|
|
|
if (min_version > MAPNIK_VERSION)
|
|
|
|
{
|
|
|
|
throw config_error(std::string("This map uses features only present in Mapnik version ") + *min_version_string + " and newer");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
}
|
2007-09-25 20:47:12 +02:00
|
|
|
}
|
|
|
|
catch (const config_error & ex)
|
|
|
|
{
|
2009-12-05 04:58:48 +01:00
|
|
|
ex.append_context("(in node Map)");
|
2007-09-25 20:47:12 +02:00
|
|
|
throw;
|
|
|
|
}
|
|
|
|
|
|
|
|
ptree::const_iterator itr = map_node.begin();
|
|
|
|
ptree::const_iterator end = map_node.end();
|
|
|
|
|
|
|
|
for (; itr != end; ++itr)
|
|
|
|
{
|
|
|
|
ptree::value_type const& v = *itr;
|
|
|
|
|
|
|
|
if (v.first == "Style")
|
|
|
|
{
|
|
|
|
parse_style( map, v.second );
|
|
|
|
}
|
|
|
|
else if (v.first == "Layer")
|
|
|
|
{
|
|
|
|
parse_layer(map, v.second );
|
|
|
|
}
|
2008-06-29 12:58:48 +02:00
|
|
|
else if (v.first == "FontSet")
|
|
|
|
{
|
|
|
|
parse_fontset(map, v.second);
|
|
|
|
}
|
2007-12-17 15:21:04 +01:00
|
|
|
else if (v.first == "FileSource")
|
|
|
|
{
|
|
|
|
std::string name = get_attr<string>( v.second, "name");
|
|
|
|
std::string value = get_own<string>( v.second, "");
|
|
|
|
file_sources_[name] = value;
|
|
|
|
}
|
|
|
|
else if (v.first == "Datasource")
|
|
|
|
{
|
|
|
|
std::string name = get_attr(v.second, "name", string("Unnamed"));
|
|
|
|
parameters params;
|
|
|
|
ptree::const_iterator paramIter = v.second.begin();
|
|
|
|
ptree::const_iterator endParam = v.second.end();
|
|
|
|
for (; paramIter != endParam; ++paramIter)
|
|
|
|
{
|
|
|
|
ptree const& param = paramIter->second;
|
|
|
|
|
|
|
|
if (paramIter->first == "Parameter")
|
|
|
|
{
|
|
|
|
std::string name = get_attr<string>(param, "name");
|
|
|
|
std::string value = get_own<string>( param,
|
|
|
|
"datasource parameter");
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
params[name] = value;
|
2007-12-17 15:21:04 +01:00
|
|
|
}
|
2009-01-18 00:53:04 +01:00
|
|
|
else if( paramIter->first != "<xmlattr>" &&
|
|
|
|
paramIter->first != "<xmlcomment>" )
|
2007-12-17 15:21:04 +01:00
|
|
|
{
|
|
|
|
throw config_error(std::string("Unknown child node in ") +
|
|
|
|
"'Datasource'. Expected 'Parameter' but got '" +
|
|
|
|
paramIter->first + "'");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
datasource_templates_[name] = params;
|
|
|
|
}
|
2007-09-25 20:47:12 +02:00
|
|
|
else if (v.first != "<xmlcomment>" &&
|
|
|
|
v.first != "<xmlattr>")
|
|
|
|
{
|
|
|
|
throw config_error(std::string("Unknown child node in 'Map'. ") +
|
|
|
|
"Expected 'Style' or 'Layer' but got '" + v.first + "'");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
2007-11-08 22:11:12 +01:00
|
|
|
catch (const boost::property_tree::ptree_bad_path &)
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
|
|
|
throw config_error("Not a map file. Node 'Map' not found.");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void map_parser::parse_style( Map & map, ptree const & sty )
|
|
|
|
{
|
|
|
|
string name("<missing name>");
|
|
|
|
try
|
|
|
|
{
|
|
|
|
name = get_attr<string>(sty, "name");
|
|
|
|
feature_type_style style;
|
|
|
|
|
|
|
|
ptree::const_iterator ruleIter = sty.begin();
|
|
|
|
ptree::const_iterator endRule = sty.end();
|
|
|
|
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
for (; ruleIter!=endRule; ++ruleIter)
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
|
|
|
ptree::value_type const& rule_tag = *ruleIter;
|
|
|
|
if (rule_tag.first == "Rule")
|
|
|
|
{
|
|
|
|
parse_rule( style, rule_tag.second );
|
|
|
|
}
|
|
|
|
else if (rule_tag.first != "<xmlcomment>" &&
|
|
|
|
rule_tag.first != "<xmlattr>" )
|
|
|
|
{
|
2009-01-18 00:53:04 +01:00
|
|
|
throw config_error(std::string("Unknown child node in 'Style'. ") +
|
2007-09-25 20:47:12 +02:00
|
|
|
"Expected 'Rule' but got '" + rule_tag.first + "'");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
map.insert_style(name, style);
|
|
|
|
|
|
|
|
} catch (const config_error & ex) {
|
|
|
|
if ( ! name.empty() ) {
|
|
|
|
ex.append_context(string("in style '") + name + "'");
|
|
|
|
}
|
|
|
|
throw;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2008-06-29 12:58:48 +02:00
|
|
|
void map_parser::parse_fontset( Map & map, ptree const & fset )
|
|
|
|
{
|
|
|
|
string name("<missing name>");
|
|
|
|
try
|
|
|
|
{
|
|
|
|
name = get_attr<string>(fset, "name");
|
|
|
|
FontSet fontset(name);
|
|
|
|
|
|
|
|
ptree::const_iterator itr = fset.begin();
|
|
|
|
ptree::const_iterator end = fset.end();
|
|
|
|
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
for (; itr != end; ++itr)
|
2008-06-29 12:58:48 +02:00
|
|
|
{
|
|
|
|
ptree::value_type const& font_tag = *itr;
|
|
|
|
|
|
|
|
if (font_tag.first == "Font")
|
|
|
|
{
|
|
|
|
parse_font(fontset, font_tag.second);
|
|
|
|
}
|
|
|
|
else if (font_tag.first != "<xmlcomment>" &&
|
|
|
|
font_tag.first != "<xmlattr>" )
|
|
|
|
{
|
2009-01-18 00:53:04 +01:00
|
|
|
throw config_error(std::string("Unknown child node in 'FontSet'. ") +
|
2008-06-29 12:58:48 +02:00
|
|
|
"Expected 'Font' but got '" + font_tag.first + "'");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
map.insert_fontset(name, fontset);
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
|
|
|
// XXX Hack because map object isn't accessible by text_symbolizer
|
2008-06-29 12:58:48 +02:00
|
|
|
// when it's parsed
|
|
|
|
fontsets_.insert(pair<std::string, FontSet>(name, fontset));
|
|
|
|
} catch (const config_error & ex) {
|
|
|
|
if ( ! name.empty() ) {
|
|
|
|
ex.append_context(string("in FontSet '") + name + "'");
|
|
|
|
}
|
|
|
|
throw;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void map_parser::parse_font(FontSet & fset, ptree const & f)
|
|
|
|
{
|
2009-01-17 21:52:24 +01:00
|
|
|
std::string face_name = get_attr(f, "face_name", string());
|
2008-06-29 12:58:48 +02:00
|
|
|
|
2009-01-17 21:52:24 +01:00
|
|
|
if ( strict_ )
|
2008-06-29 12:58:48 +02:00
|
|
|
{
|
2009-01-17 21:52:24 +01:00
|
|
|
ensure_font_face( face_name );
|
2008-06-29 12:58:48 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
fset.add_face_name(face_name);
|
|
|
|
}
|
|
|
|
|
2007-09-25 20:47:12 +02:00
|
|
|
void map_parser::parse_layer( Map & map, ptree const & lay )
|
|
|
|
{
|
|
|
|
std::string name;
|
|
|
|
try
|
|
|
|
{
|
|
|
|
name = get_attr(lay, "name", string("Unnamed"));
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2007-09-25 20:47:12 +02:00
|
|
|
// XXX if no projection is given inherit from map? [DS]
|
|
|
|
std::string srs = get_attr(lay, "srs", map.srs());
|
|
|
|
|
|
|
|
Layer lyr(name, srs);
|
|
|
|
|
|
|
|
optional<boolean> status = get_opt_attr<boolean>(lay, "status");
|
|
|
|
if (status)
|
|
|
|
{
|
|
|
|
lyr.setActive( * status );
|
|
|
|
}
|
|
|
|
|
2009-01-11 19:55:29 +01:00
|
|
|
optional<std::string> title = get_opt_attr<string>(lay, "title");
|
|
|
|
if (title)
|
|
|
|
{
|
|
|
|
lyr.set_title( * title );
|
|
|
|
}
|
|
|
|
|
|
|
|
optional<std::string> abstract = get_opt_attr<string>(lay, "abstract");
|
|
|
|
if (abstract)
|
|
|
|
{
|
|
|
|
lyr.set_abstract( * abstract );
|
|
|
|
}
|
|
|
|
|
|
|
|
optional<double> minZoom = get_opt_attr<double>(lay, "minzoom");
|
|
|
|
if (minZoom)
|
|
|
|
{
|
|
|
|
lyr.setMinZoom( * minZoom );
|
|
|
|
}
|
|
|
|
|
|
|
|
optional<double> maxZoom = get_opt_attr<double>(lay, "maxzoom");
|
|
|
|
if (maxZoom)
|
|
|
|
{
|
|
|
|
lyr.setMaxZoom( * maxZoom );
|
|
|
|
}
|
|
|
|
|
|
|
|
optional<boolean> queryable = get_opt_attr<boolean>(lay, "queryable");
|
|
|
|
if (queryable)
|
|
|
|
{
|
|
|
|
lyr.setQueryable( * queryable );
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2007-09-25 20:47:12 +02:00
|
|
|
optional<boolean> clear_cache =
|
|
|
|
get_opt_attr<boolean>(lay, "clear_label_cache");
|
|
|
|
if (clear_cache)
|
|
|
|
{
|
|
|
|
lyr.set_clear_label_cache( * clear_cache );
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
ptree::const_iterator itr2 = lay.begin();
|
|
|
|
ptree::const_iterator end2 = lay.end();
|
|
|
|
|
|
|
|
for(; itr2 != end2; ++itr2)
|
|
|
|
{
|
|
|
|
ptree::value_type const& child = *itr2;
|
|
|
|
|
|
|
|
if (child.first == "StyleName")
|
|
|
|
{
|
|
|
|
// TODO check references [DS]
|
|
|
|
lyr.add_style(child.second.data());
|
|
|
|
}
|
|
|
|
else if (child.first == "Datasource")
|
|
|
|
{
|
|
|
|
parameters params;
|
2007-12-17 15:21:04 +01:00
|
|
|
optional<std::string> base = get_opt_attr<std::string>( child.second, "base" );
|
|
|
|
if( base )
|
|
|
|
{
|
|
|
|
std::map<std::string,parameters>::const_iterator base_itr = datasource_templates_.find(*base);
|
|
|
|
if (base_itr!=datasource_templates_.end())
|
|
|
|
params = base_itr->second;
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
}
|
|
|
|
|
2007-09-25 20:47:12 +02:00
|
|
|
ptree::const_iterator paramIter = child.second.begin();
|
|
|
|
ptree::const_iterator endParam = child.second.end();
|
|
|
|
for (; paramIter != endParam; ++paramIter)
|
2006-10-03 10:39:43 +02:00
|
|
|
{
|
2007-09-25 20:47:12 +02:00
|
|
|
ptree const& param = paramIter->second;
|
|
|
|
|
|
|
|
if (paramIter->first == "Parameter")
|
2006-10-09 22:49:56 +02:00
|
|
|
{
|
2007-09-25 20:47:12 +02:00
|
|
|
std::string name = get_attr<string>(param, "name");
|
|
|
|
std::string value = get_own<string>( param,
|
|
|
|
"datasource parameter");
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
params[name] = value;
|
2006-10-09 22:49:56 +02:00
|
|
|
}
|
2009-01-18 00:53:04 +01:00
|
|
|
else if( paramIter->first != "<xmlattr>" &&
|
|
|
|
paramIter->first != "<xmlcomment>" )
|
2006-10-03 10:39:43 +02:00
|
|
|
{
|
2007-09-25 20:47:12 +02:00
|
|
|
throw config_error(std::string("Unknown child node in ") +
|
|
|
|
"'Datasource'. Expected 'Parameter' but got '" +
|
|
|
|
paramIter->first + "'");
|
2006-10-03 10:39:43 +02:00
|
|
|
}
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2009-05-01 03:59:01 +02:00
|
|
|
if ( relative_to_xml_ ) {
|
|
|
|
boost::optional<std::string> base_param = params.get<std::string>("base");
|
|
|
|
boost::optional<std::string> file_param = params.get<std::string>("file");
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2009-05-01 03:59:01 +02:00
|
|
|
if (base_param){
|
|
|
|
params["base"] = ensure_relative_to_xml(base_param);
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2009-05-01 03:59:01 +02:00
|
|
|
else if (file_param){
|
|
|
|
params["file"] = ensure_relative_to_xml(file_param);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#ifdef MAPNIK_DEBUG
|
|
|
|
else {
|
|
|
|
std::clog << "\nFound relative paths in xml, leaving unchanged...\n";
|
|
|
|
}
|
|
|
|
#endif
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
|
|
|
//now we are ready to create datasource
|
|
|
|
try
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
|
|
|
boost::shared_ptr<datasource> ds =
|
|
|
|
datasource_cache::instance()->create(params);
|
|
|
|
lyr.set_datasource(ds);
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2009-04-14 01:22:00 +02:00
|
|
|
// catch problem at datasource registration
|
|
|
|
catch (const mapnik::config_error & ex )
|
|
|
|
{
|
|
|
|
throw config_error( ex.what() );
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2009-04-14 01:22:00 +02:00
|
|
|
// catch problem at the datasource creation
|
2007-09-25 20:47:12 +02:00
|
|
|
catch (const mapnik::datasource_exception & ex )
|
|
|
|
{
|
|
|
|
throw config_error( ex.what() );
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2008-02-12 21:03:04 +01:00
|
|
|
catch (...)
|
|
|
|
{
|
|
|
|
//throw config_error("exception...");
|
|
|
|
}
|
2007-09-25 20:47:12 +02:00
|
|
|
}
|
|
|
|
else if (child.first != "<xmlattr>" &&
|
|
|
|
child.first != "<xmlcomment>")
|
|
|
|
{
|
|
|
|
throw config_error(std::string("Unknown child node in 'Layer'. ") +
|
|
|
|
"Expected 'StyleName' or 'Datasource' but got '" +
|
|
|
|
child.first + "'");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
map.addLayer(lyr);
|
|
|
|
|
|
|
|
} catch (const config_error & ex) {
|
|
|
|
if ( ! name.empty() ) {
|
2009-08-27 06:48:32 +02:00
|
|
|
ex.append_context(string("(encountered during parsing of layer '") + name + "')");
|
2007-09-25 20:47:12 +02:00
|
|
|
}
|
|
|
|
throw;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void map_parser::parse_rule( feature_type_style & style, ptree const & r )
|
|
|
|
{
|
|
|
|
std::string name;
|
|
|
|
try
|
|
|
|
{
|
|
|
|
name = get_attr( r, "name", string());
|
|
|
|
std::string title = get_attr( r, "title", string());
|
|
|
|
|
|
|
|
rule_type rule(name,title);
|
|
|
|
|
|
|
|
optional<std::string> filter_expr =
|
|
|
|
get_opt_child<string>( r, "Filter");
|
|
|
|
if (filter_expr)
|
|
|
|
{
|
2008-02-26 12:43:49 +01:00
|
|
|
// can we use encoding defined for XML document for filter expressions?
|
|
|
|
rule.set_filter(create_filter(*filter_expr,"utf8"));
|
2007-09-25 20:47:12 +02:00
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
|
|
|
optional<std::string> else_filter =
|
2007-09-25 20:47:12 +02:00
|
|
|
get_opt_child<string>(r, "ElseFilter");
|
|
|
|
if (else_filter)
|
|
|
|
{
|
|
|
|
rule.set_else(true);
|
|
|
|
}
|
|
|
|
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
optional<double> min_scale =
|
2007-09-25 20:47:12 +02:00
|
|
|
get_opt_child<double>(r, "MinScaleDenominator");
|
|
|
|
if (min_scale)
|
|
|
|
{
|
|
|
|
rule.set_min_scale(*min_scale);
|
|
|
|
}
|
|
|
|
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
optional<double> max_scale =
|
2007-09-25 20:47:12 +02:00
|
|
|
get_opt_child<double>(r, "MaxScaleDenominator");
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
if (max_scale)
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
rule.set_max_scale(*max_scale);
|
|
|
|
}
|
2007-09-25 20:47:12 +02:00
|
|
|
|
|
|
|
ptree::const_iterator symIter = r.begin();
|
|
|
|
ptree::const_iterator endSym = r.end();
|
|
|
|
|
|
|
|
for( ;symIter != endSym; ++symIter)
|
|
|
|
{
|
|
|
|
ptree::value_type const& sym = *symIter;
|
|
|
|
|
|
|
|
if ( sym.first == "PointSymbolizer")
|
|
|
|
{
|
|
|
|
parse_point_symbolizer( rule, sym.second );
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
}
|
2007-09-25 20:47:12 +02:00
|
|
|
else if ( sym.first == "LinePatternSymbolizer")
|
|
|
|
{
|
|
|
|
parse_line_pattern_symbolizer( rule, sym.second );
|
|
|
|
}
|
|
|
|
else if ( sym.first == "PolygonPatternSymbolizer")
|
|
|
|
{
|
|
|
|
parse_polygon_pattern_symbolizer( rule, sym.second );
|
|
|
|
}
|
|
|
|
else if ( sym.first == "TextSymbolizer")
|
|
|
|
{
|
|
|
|
parse_text_symbolizer( rule, sym.second );
|
|
|
|
}
|
|
|
|
else if ( sym.first == "ShieldSymbolizer")
|
|
|
|
{
|
|
|
|
parse_shield_symbolizer( rule, sym.second );
|
|
|
|
}
|
|
|
|
else if ( sym.first == "LineSymbolizer")
|
|
|
|
{
|
|
|
|
parse_line_symbolizer( rule, sym.second );
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
}
|
2007-09-25 20:47:12 +02:00
|
|
|
else if ( sym.first == "PolygonSymbolizer")
|
|
|
|
{
|
|
|
|
parse_polygon_symbolizer( rule, sym.second );
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
}
|
2007-09-25 20:47:12 +02:00
|
|
|
else if ( sym.first == "BuildingSymbolizer")
|
|
|
|
{
|
|
|
|
parse_building_symbolizer( rule, sym.second );
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
}
|
2007-09-25 20:47:12 +02:00
|
|
|
else if ( sym.first == "RasterSymbolizer")
|
|
|
|
{
|
2009-03-29 13:05:20 +02:00
|
|
|
parse_raster_symbolizer( rule, sym.second );
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
}
|
2007-11-02 13:50:15 +01:00
|
|
|
else if ( sym.first == "MarkersSymbolizer")
|
|
|
|
{
|
|
|
|
rule.append(markers_symbolizer());
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
}
|
|
|
|
|
2007-09-25 20:47:12 +02:00
|
|
|
else if ( sym.first != "MinScaleDenominator" &&
|
|
|
|
sym.first != "MaxScaleDenominator" &&
|
|
|
|
sym.first != "Filter" &&
|
|
|
|
sym.first != "ElseFilter" &&
|
|
|
|
sym.first != "<xmlcomment>" &&
|
|
|
|
sym.first != "<xmlattr>" )
|
|
|
|
{
|
|
|
|
throw config_error(std::string("Unknown symbolizer '") +
|
|
|
|
sym.first + "'");
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
}
|
2007-09-25 20:47:12 +02:00
|
|
|
|
|
|
|
style.add_rule(rule);
|
|
|
|
|
|
|
|
}
|
|
|
|
catch (const config_error & ex)
|
|
|
|
{
|
|
|
|
if ( ! name.empty() )
|
|
|
|
{
|
|
|
|
ex.append_context(string("in rule '") + name + "'");
|
|
|
|
}
|
|
|
|
throw;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void map_parser::parse_point_symbolizer( rule_type & rule, ptree const & sym )
|
|
|
|
{
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
try
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
|
|
|
optional<std::string> file = get_opt_attr<string>(sym, "file");
|
2007-12-17 15:21:04 +01:00
|
|
|
optional<std::string> base = get_opt_attr<string>(sym, "base");
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
optional<std::string> type = get_opt_attr<string>(sym, "type");
|
|
|
|
optional<boolean> allow_overlap =
|
2007-09-25 20:47:12 +02:00
|
|
|
get_opt_attr<boolean>(sym, "allow_overlap");
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
optional<float> opacity =
|
2008-09-19 10:27:32 +02:00
|
|
|
get_opt_attr<float>(sym, "opacity");
|
2007-09-25 20:47:12 +02:00
|
|
|
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
optional<unsigned> width = get_opt_attr<unsigned>(sym, "width");
|
|
|
|
optional<unsigned> height = get_opt_attr<unsigned>(sym, "height");
|
2007-09-25 20:47:12 +02:00
|
|
|
|
|
|
|
if (file && type && width && height)
|
|
|
|
{
|
|
|
|
try
|
|
|
|
{
|
2007-12-17 15:21:04 +01:00
|
|
|
if( base )
|
|
|
|
{
|
|
|
|
std::map<std::string,std::string>::const_iterator itr = file_sources_.find(*base);
|
|
|
|
if (itr!=file_sources_.end())
|
|
|
|
{
|
|
|
|
*file = itr->second + "/" + *file;
|
|
|
|
}
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2009-05-01 03:59:01 +02:00
|
|
|
if ( relative_to_xml_ )
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
{
|
2009-05-01 03:59:01 +02:00
|
|
|
*file = ensure_relative_to_xml(file);
|
|
|
|
}
|
|
|
|
#ifdef MAPNIK_DEBUG
|
|
|
|
else {
|
|
|
|
std::clog << "\nFound relative paths in xml, leaving unchanged...\n";
|
|
|
|
}
|
|
|
|
#endif
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2007-12-17 15:21:04 +01:00
|
|
|
point_symbolizer symbol(*file,*type,*width,*height);
|
|
|
|
if (allow_overlap)
|
|
|
|
{
|
|
|
|
symbol.set_allow_overlap( * allow_overlap );
|
|
|
|
}
|
2008-09-19 10:27:32 +02:00
|
|
|
if (opacity)
|
|
|
|
{
|
|
|
|
symbol.set_opacity( * opacity );
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
}
|
2007-12-17 15:21:04 +01:00
|
|
|
rule.append(symbol);
|
2006-10-03 10:39:43 +02:00
|
|
|
}
|
2007-09-25 20:47:12 +02:00
|
|
|
catch (ImageReaderException const & ex )
|
|
|
|
{
|
|
|
|
string msg("Failed to load image file '" + * file +
|
|
|
|
"': " + ex.what());
|
|
|
|
if (strict_)
|
2006-10-03 10:39:43 +02:00
|
|
|
{
|
2007-09-25 20:47:12 +02:00
|
|
|
throw config_error(msg);
|
2006-10-03 10:39:43 +02:00
|
|
|
}
|
2007-09-25 20:47:12 +02:00
|
|
|
else
|
2006-10-03 10:39:43 +02:00
|
|
|
{
|
2007-09-25 20:47:12 +02:00
|
|
|
clog << "### WARNING: " << msg << endl;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
}
|
|
|
|
else if (file || type || width || height)
|
|
|
|
{
|
|
|
|
std::ostringstream os;
|
|
|
|
os << "Missing required attributes: ";
|
|
|
|
if ( ! file ) os << "file ";
|
|
|
|
if ( ! type ) os << "type ";
|
|
|
|
if ( ! width ) os << "width ";
|
|
|
|
if ( ! height ) os << "height ";
|
|
|
|
throw config_error( os.str() );
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
else
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
|
|
|
rule.append(point_symbolizer());
|
|
|
|
}
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
catch (const config_error & ex)
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
|
|
|
ex.append_context("in PointSymbolizer");
|
|
|
|
throw;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void map_parser::parse_line_pattern_symbolizer( rule_type & rule, ptree const & sym )
|
|
|
|
{
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
try
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
|
|
|
std::string file = get_attr<string>(sym, "file");
|
2007-12-17 15:21:04 +01:00
|
|
|
optional<std::string> base = get_opt_attr<string>(sym, "base");
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
std::string type = get_attr<string>(sym, "type");
|
2007-09-25 20:47:12 +02:00
|
|
|
unsigned width = get_attr<unsigned>(sym, "width");
|
|
|
|
unsigned height = get_attr<unsigned>(sym, "height");
|
|
|
|
|
|
|
|
try
|
|
|
|
{
|
2007-12-17 15:21:04 +01:00
|
|
|
if( base )
|
|
|
|
{
|
|
|
|
std::map<std::string,std::string>::const_iterator itr = file_sources_.find(*base);
|
|
|
|
if (itr!=file_sources_.end())
|
|
|
|
{
|
|
|
|
file = itr->second + "/" + file;
|
|
|
|
}
|
|
|
|
}
|
2009-05-01 03:59:01 +02:00
|
|
|
if ( relative_to_xml_ )
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
{
|
2009-05-01 03:59:01 +02:00
|
|
|
file = ensure_relative_to_xml(file);
|
|
|
|
}
|
|
|
|
#ifdef MAPNIK_DEBUG
|
|
|
|
else {
|
|
|
|
std::clog << "\nFound relative paths in xml, leaving unchanged...\n";
|
|
|
|
}
|
|
|
|
#endif
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2009-05-01 03:59:01 +02:00
|
|
|
|
|
|
|
line_pattern_symbolizer symbol(file,type,width,height);
|
|
|
|
rule.append(symbol);
|
2007-09-25 20:47:12 +02:00
|
|
|
}
|
|
|
|
catch (ImageReaderException const & ex )
|
|
|
|
{
|
|
|
|
string msg("Failed to load image file '" + file +
|
|
|
|
"': " + ex.what());
|
|
|
|
if (strict_)
|
|
|
|
{
|
|
|
|
throw config_error(msg);
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
clog << "### WARNING: " << msg << endl;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
catch (const config_error & ex)
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
|
|
|
ex.append_context("in LinePatternSymbolizer");
|
|
|
|
throw;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void map_parser::parse_polygon_pattern_symbolizer( rule_type & rule,
|
|
|
|
ptree const & sym )
|
|
|
|
{
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
try
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
|
|
|
std::string file = get_attr<string>(sym, "file");
|
2007-12-17 15:21:04 +01:00
|
|
|
optional<std::string> base = get_opt_attr<string>(sym, "base");
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
std::string type = get_attr<string>(sym, "type");
|
2007-09-25 20:47:12 +02:00
|
|
|
unsigned width = get_attr<unsigned>(sym, "width");
|
|
|
|
unsigned height = get_attr<unsigned>(sym, "height");
|
|
|
|
|
|
|
|
try
|
|
|
|
{
|
2007-12-17 15:21:04 +01:00
|
|
|
if( base )
|
|
|
|
{
|
|
|
|
std::map<std::string,std::string>::iterator itr = file_sources_.find(*base);
|
|
|
|
if (itr!=file_sources_.end())
|
|
|
|
{
|
|
|
|
file = itr->second + "/" + file;
|
|
|
|
}
|
|
|
|
}
|
2009-05-01 03:59:01 +02:00
|
|
|
if ( relative_to_xml_ )
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
{
|
2009-05-01 03:59:01 +02:00
|
|
|
file = ensure_relative_to_xml(file);
|
|
|
|
}
|
|
|
|
#ifdef MAPNIK_DEBUG
|
|
|
|
else {
|
|
|
|
std::clog << "\nFound relative paths in xml, leaving unchanged...\n";
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
polygon_pattern_symbolizer symbol(file,type,width,height);
|
|
|
|
rule.append(symbol);
|
2007-09-25 20:47:12 +02:00
|
|
|
}
|
|
|
|
catch (ImageReaderException const & ex )
|
|
|
|
{
|
|
|
|
string msg("Failed to load image file '" + file +
|
|
|
|
"': " + ex.what());
|
|
|
|
if (strict_)
|
|
|
|
{
|
|
|
|
throw config_error(msg);
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
clog << "### WARNING: " << msg << endl;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
catch (const config_error & ex)
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
|
|
|
ex.append_context("in PolygonPatternSymbolizer");
|
|
|
|
throw;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void map_parser::parse_text_symbolizer( rule_type & rule, ptree const & sym )
|
|
|
|
{
|
|
|
|
try
|
|
|
|
{
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
std::string name = get_attr<string>(sym, "name");
|
2008-06-29 12:40:08 +02:00
|
|
|
|
2008-06-29 12:58:48 +02:00
|
|
|
optional<std::string> face_name =
|
|
|
|
get_opt_attr<std::string>(sym, "face_name");
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2008-06-29 12:58:48 +02:00
|
|
|
optional<std::string> fontset_name =
|
|
|
|
get_opt_attr<std::string>(sym, "fontset_name");
|
2008-06-29 12:58:29 +02:00
|
|
|
|
2008-06-29 12:58:48 +02:00
|
|
|
unsigned size = get_attr(sym, "size", 10U);
|
|
|
|
|
2009-01-14 13:10:24 +01:00
|
|
|
color c = get_attr(sym, "fill", color(0,0,0));
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
|
|
|
text_symbolizer text_symbol = text_symbolizer(name, size, c);
|
|
|
|
|
2008-06-29 12:58:48 +02:00
|
|
|
if (fontset_name && face_name)
|
|
|
|
{
|
|
|
|
throw config_error(std::string("Can't have both face_name and fontset_name"));
|
|
|
|
}
|
|
|
|
else if (fontset_name)
|
|
|
|
{
|
|
|
|
std::map<std::string,FontSet>::const_iterator itr = fontsets_.find(*fontset_name);
|
|
|
|
if (itr != fontsets_.end())
|
|
|
|
{
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
text_symbol.set_fontset(itr->second);
|
2008-06-29 12:58:48 +02:00
|
|
|
}
|
2009-01-17 21:52:24 +01:00
|
|
|
else
|
|
|
|
{
|
|
|
|
throw config_error("Unable to find any fontset named '" + *fontset_name + "'");
|
|
|
|
}
|
2008-06-29 12:58:48 +02:00
|
|
|
}
|
|
|
|
else if (face_name)
|
|
|
|
{
|
2009-01-17 21:52:24 +01:00
|
|
|
if ( strict_ )
|
|
|
|
{
|
|
|
|
ensure_font_face(*face_name);
|
|
|
|
}
|
|
|
|
text_symbol.set_face_name(*face_name);
|
2008-06-29 12:58:48 +02:00
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
throw config_error(std::string("Must have face_name or fontset_name"));
|
|
|
|
}
|
2007-09-25 20:47:12 +02:00
|
|
|
|
2009-07-24 09:24:36 +02:00
|
|
|
double dx = get_attr(sym, "dx", 0.0);
|
|
|
|
double dy = get_attr(sym, "dy", 0.0);
|
2007-09-25 20:47:12 +02:00
|
|
|
text_symbol.set_displacement(dx,dy);
|
|
|
|
|
|
|
|
label_placement_e placement =
|
|
|
|
get_attr<label_placement_e>(sym, "placement", POINT_PLACEMENT);
|
|
|
|
text_symbol.set_label_placement( placement );
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
// vertical alignment
|
2009-03-30 22:47:26 +02:00
|
|
|
vertical_alignment_e valign = get_attr<vertical_alignment_e>(sym, "vertical_alignment", BOTTOM);
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
text_symbol.set_vertical_alignment(valign);
|
2007-09-25 20:47:12 +02:00
|
|
|
|
|
|
|
// halo fill and radius
|
2009-01-14 13:10:24 +01:00
|
|
|
optional<color> halo_fill = get_opt_attr<color>(sym, "halo_fill");
|
2007-09-25 20:47:12 +02:00
|
|
|
if (halo_fill)
|
|
|
|
{
|
|
|
|
text_symbol.set_halo_fill( * halo_fill );
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
optional<unsigned> halo_radius =
|
2007-09-25 20:47:12 +02:00
|
|
|
get_opt_attr<unsigned>(sym, "halo_radius");
|
|
|
|
if (halo_radius)
|
|
|
|
{
|
|
|
|
text_symbol.set_halo_radius(*halo_radius);
|
|
|
|
}
|
|
|
|
|
|
|
|
// text ratio and wrap width
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
optional<unsigned> text_ratio =
|
2007-09-25 20:47:12 +02:00
|
|
|
get_opt_attr<unsigned>(sym, "text_ratio");
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
if (text_ratio)
|
|
|
|
{
|
|
|
|
text_symbol.set_text_ratio(*text_ratio);
|
|
|
|
}
|
2007-09-25 20:47:12 +02:00
|
|
|
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
optional<unsigned> wrap_width =
|
2007-09-25 20:47:12 +02:00
|
|
|
get_opt_attr<unsigned>(sym, "wrap_width");
|
|
|
|
if (wrap_width)
|
|
|
|
{
|
|
|
|
text_symbol.set_wrap_width(*wrap_width);
|
|
|
|
}
|
|
|
|
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
optional<boolean> wrap_before =
|
|
|
|
get_opt_attr<boolean>(sym, "wrap_before");
|
|
|
|
if (wrap_before)
|
|
|
|
{
|
|
|
|
text_symbol.set_wrap_before(*wrap_before);
|
|
|
|
}
|
|
|
|
|
2009-07-20 17:30:19 +02:00
|
|
|
// character used to break long strings
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
optional<std::string> wrap_char =
|
2009-07-20 17:30:19 +02:00
|
|
|
get_opt_attr<std::string>(sym, "wrap_character");
|
|
|
|
if (wrap_char && (*wrap_char).size() > 0)
|
|
|
|
{
|
|
|
|
text_symbol.set_wrap_char((*wrap_char)[0]);
|
|
|
|
}
|
|
|
|
|
|
|
|
// text conversion before rendering
|
|
|
|
text_convert_e tconvert =
|
|
|
|
get_attr<text_convert_e>(sym, "text_convert", NONE);
|
|
|
|
text_symbol.set_text_convert(tconvert);
|
|
|
|
|
|
|
|
// spacing between text lines
|
|
|
|
optional<unsigned> line_spacing = get_opt_attr<unsigned>(sym, "line_spacing");
|
|
|
|
if (line_spacing)
|
|
|
|
{
|
|
|
|
text_symbol.set_line_spacing(*line_spacing);
|
|
|
|
}
|
|
|
|
|
|
|
|
// spacing between characters in text
|
|
|
|
optional<unsigned> character_spacing = get_opt_attr<unsigned>(sym, "character_spacing");
|
|
|
|
if (character_spacing)
|
|
|
|
{
|
|
|
|
text_symbol.set_character_spacing(*character_spacing);
|
|
|
|
}
|
|
|
|
|
2007-09-25 20:47:12 +02:00
|
|
|
// spacing between repeated labels on lines
|
|
|
|
optional<unsigned> spacing = get_opt_attr<unsigned>(sym, "spacing");
|
|
|
|
if (spacing)
|
|
|
|
{
|
|
|
|
text_symbol.set_label_spacing(*spacing);
|
|
|
|
}
|
|
|
|
|
|
|
|
// minimum distance between labels
|
|
|
|
optional<unsigned> min_distance =
|
|
|
|
get_opt_attr<unsigned>(sym, "min_distance");
|
|
|
|
if (min_distance)
|
|
|
|
{
|
|
|
|
text_symbol.set_minimum_distance(*min_distance);
|
|
|
|
}
|
|
|
|
|
2009-05-01 03:59:01 +02:00
|
|
|
// do not render labels around edges
|
2007-11-05 11:32:01 +01:00
|
|
|
optional<boolean> avoid_edges =
|
|
|
|
get_opt_attr<boolean>(sym, "avoid_edges");
|
|
|
|
if (avoid_edges)
|
|
|
|
{
|
|
|
|
text_symbol.set_avoid_edges( * avoid_edges);
|
|
|
|
}
|
|
|
|
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
// allow_overlap
|
|
|
|
optional<boolean> allow_overlap =
|
2007-09-25 20:47:12 +02:00
|
|
|
get_opt_attr<boolean>(sym, "allow_overlap");
|
|
|
|
if (allow_overlap)
|
|
|
|
{
|
|
|
|
text_symbol.set_allow_overlap( * allow_overlap );
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
|
|
|
// opacity
|
|
|
|
optional<double> opacity =
|
|
|
|
get_opt_attr<double>(sym, "opacity");
|
|
|
|
if (opacity)
|
|
|
|
{
|
|
|
|
text_symbol.set_opacity( * opacity );
|
|
|
|
}
|
|
|
|
|
2007-11-02 13:50:15 +01:00
|
|
|
// max_char_angle_delta
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
optional<double> max_char_angle_delta =
|
2007-11-02 13:50:15 +01:00
|
|
|
get_opt_attr<double>(sym, "max_char_angle_delta");
|
|
|
|
if (max_char_angle_delta)
|
|
|
|
{
|
|
|
|
text_symbol.set_max_char_angle_delta( * max_char_angle_delta);
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
|
|
|
// horizontal alignment
|
|
|
|
horizontal_alignment_e halign = get_attr<horizontal_alignment_e>(sym, "horizontal_alignment", H_MIDDLE);
|
|
|
|
text_symbol.set_horizontal_alignment(halign);
|
|
|
|
|
|
|
|
// justify alignment
|
|
|
|
justify_alignment_e jalign = get_attr<justify_alignment_e>(sym, "justify_alignment", J_MIDDLE);
|
|
|
|
text_symbol.set_justify_alignment(jalign);
|
|
|
|
|
2007-09-25 20:47:12 +02:00
|
|
|
rule.append(text_symbol);
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
catch (const config_error & ex)
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
|
|
|
ex.append_context("in TextSymbolizer");
|
|
|
|
throw;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void map_parser::parse_shield_symbolizer( rule_type & rule, ptree const & sym )
|
|
|
|
{
|
|
|
|
try
|
|
|
|
{
|
|
|
|
std::string name = get_attr<string>(sym, "name");
|
2008-07-30 01:21:39 +02:00
|
|
|
|
|
|
|
optional<std::string> face_name =
|
|
|
|
get_opt_attr<std::string>(sym, "face_name");
|
|
|
|
|
|
|
|
optional<std::string> fontset_name =
|
|
|
|
get_opt_attr<std::string>(sym, "fontset_name");
|
|
|
|
|
2007-09-25 20:47:12 +02:00
|
|
|
unsigned size = get_attr(sym, "size", 10U);
|
2009-01-14 13:10:24 +01:00
|
|
|
color fill = get_attr(sym, "fill", color(0,0,0));
|
2007-09-25 20:47:12 +02:00
|
|
|
|
|
|
|
std::string image_file = get_attr<string>(sym, "file");
|
2007-12-17 15:21:04 +01:00
|
|
|
optional<std::string> base = get_opt_attr<string>(sym, "base");
|
2007-09-25 20:47:12 +02:00
|
|
|
std::string type = get_attr<string>(sym, "type");
|
|
|
|
unsigned width = get_attr<unsigned>(sym, "width");
|
|
|
|
unsigned height = get_attr<unsigned>(sym, "height");
|
|
|
|
|
|
|
|
try
|
|
|
|
{
|
2007-12-17 15:21:04 +01:00
|
|
|
if( base )
|
|
|
|
{
|
|
|
|
std::map<std::string,std::string>::const_iterator itr = file_sources_.find(*base);
|
|
|
|
if (itr!=file_sources_.end())
|
|
|
|
{
|
|
|
|
image_file = itr->second + "/" + image_file;
|
|
|
|
}
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2009-05-01 03:59:01 +02:00
|
|
|
if ( relative_to_xml_ )
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
{
|
2009-05-01 03:59:01 +02:00
|
|
|
image_file = ensure_relative_to_xml(image_file);
|
|
|
|
}
|
|
|
|
#ifdef MAPNIK_DEBUG
|
|
|
|
else {
|
|
|
|
std::clog << "\nFound relative paths in xml, leaving unchanged...\n";
|
|
|
|
}
|
|
|
|
#endif
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2008-07-30 01:21:39 +02:00
|
|
|
shield_symbolizer shield_symbol(name,size,fill,
|
2007-12-17 15:21:04 +01:00
|
|
|
image_file,type,width,height);
|
2008-07-30 01:21:39 +02:00
|
|
|
|
|
|
|
if (fontset_name && face_name)
|
|
|
|
{
|
|
|
|
throw config_error(std::string("Can't have both face_name and fontset_name"));
|
|
|
|
}
|
|
|
|
else if (fontset_name)
|
|
|
|
{
|
|
|
|
std::map<std::string,FontSet>::const_iterator itr = fontsets_.find(*fontset_name);
|
|
|
|
if (itr != fontsets_.end())
|
|
|
|
{
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
shield_symbol.set_fontset(itr->second);
|
2008-07-30 01:21:39 +02:00
|
|
|
}
|
2009-01-17 21:52:24 +01:00
|
|
|
else
|
|
|
|
{
|
|
|
|
throw config_error("Unable to find any fontset named '" + *fontset_name + "'");
|
|
|
|
}
|
2008-07-30 01:21:39 +02:00
|
|
|
}
|
|
|
|
else if (face_name)
|
|
|
|
{
|
2009-01-17 21:52:24 +01:00
|
|
|
if ( strict_ )
|
|
|
|
{
|
|
|
|
ensure_font_face(*face_name);
|
|
|
|
}
|
|
|
|
shield_symbol.set_face_name(*face_name);
|
2008-07-30 01:21:39 +02:00
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
throw config_error(std::string("Must have face_name or fontset_name"));
|
|
|
|
}
|
2008-09-15 10:48:21 +02:00
|
|
|
// text displacement
|
2009-07-24 09:24:36 +02:00
|
|
|
double dx = get_attr(sym, "dx", 0.0);
|
|
|
|
double dy = get_attr(sym, "dy", 0.0);
|
2008-09-15 10:48:21 +02:00
|
|
|
shield_symbol.set_displacement(dx,dy);
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2008-09-15 10:48:21 +02:00
|
|
|
label_placement_e placement =
|
|
|
|
get_attr<label_placement_e>(sym, "placement", POINT_PLACEMENT);
|
|
|
|
shield_symbol.set_label_placement( placement );
|
|
|
|
|
2008-09-21 12:14:38 +02:00
|
|
|
// don't render shields around edges
|
|
|
|
optional<boolean> avoid_edges =
|
|
|
|
get_opt_attr<boolean>(sym, "avoid_edges");
|
|
|
|
if (avoid_edges)
|
|
|
|
{
|
|
|
|
shield_symbol.set_avoid_edges( *avoid_edges);
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2008-09-15 10:48:21 +02:00
|
|
|
// halo fill and radius
|
2009-01-14 13:10:24 +01:00
|
|
|
optional<color> halo_fill = get_opt_attr<color>(sym, "halo_fill");
|
2008-09-15 10:48:21 +02:00
|
|
|
if (halo_fill)
|
|
|
|
{
|
|
|
|
shield_symbol.set_halo_fill( * halo_fill );
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
optional<unsigned> halo_radius =
|
2008-09-15 10:48:21 +02:00
|
|
|
get_opt_attr<unsigned>(sym, "halo_radius");
|
|
|
|
if (halo_radius)
|
|
|
|
{
|
|
|
|
shield_symbol.set_halo_radius(*halo_radius);
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2007-09-25 20:47:12 +02:00
|
|
|
// minimum distance between labels
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
optional<unsigned> min_distance =
|
2007-09-25 20:47:12 +02:00
|
|
|
get_opt_attr<unsigned>(sym, "min_distance");
|
|
|
|
if (min_distance)
|
|
|
|
{
|
|
|
|
shield_symbol.set_minimum_distance(*min_distance);
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2009-02-16 22:45:32 +01:00
|
|
|
// spacing between repeated labels on lines
|
|
|
|
optional<unsigned> spacing = get_opt_attr<unsigned>(sym, "spacing");
|
|
|
|
if (spacing)
|
|
|
|
{
|
|
|
|
shield_symbol.set_label_spacing(*spacing);
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
|
|
|
// allow_overlap
|
|
|
|
optional<boolean> allow_overlap =
|
|
|
|
get_opt_attr<boolean>(sym, "allow_overlap");
|
|
|
|
if (allow_overlap)
|
|
|
|
{
|
|
|
|
shield_symbol.set_allow_overlap( * allow_overlap );
|
|
|
|
}
|
|
|
|
|
|
|
|
// vertical alignment
|
|
|
|
vertical_alignment_e valign = get_attr<vertical_alignment_e>(sym, "vertical_alignment", BOTTOM);
|
|
|
|
shield_symbol.set_vertical_alignment(valign);
|
|
|
|
|
|
|
|
// horizontal alignment
|
|
|
|
horizontal_alignment_e halign = get_attr<horizontal_alignment_e>(sym, "horizontal_alignment", H_MIDDLE);
|
|
|
|
shield_symbol.set_horizontal_alignment(halign);
|
|
|
|
|
|
|
|
// justify alignment
|
|
|
|
justify_alignment_e jalign = get_attr<justify_alignment_e>(sym, "justify_alignment", J_MIDDLE);
|
|
|
|
shield_symbol.set_justify_alignment(jalign);
|
|
|
|
|
|
|
|
optional<unsigned> wrap_width =
|
|
|
|
get_opt_attr<unsigned>(sym, "wrap_width");
|
|
|
|
if (wrap_width)
|
|
|
|
{
|
|
|
|
shield_symbol.set_wrap_width(*wrap_width);
|
|
|
|
}
|
|
|
|
|
|
|
|
optional<boolean> wrap_before =
|
|
|
|
get_opt_attr<boolean>(sym, "wrap_before");
|
|
|
|
if (wrap_before)
|
|
|
|
{
|
|
|
|
shield_symbol.set_wrap_before(*wrap_before);
|
|
|
|
}
|
|
|
|
|
|
|
|
// character used to break long strings
|
|
|
|
optional<std::string> wrap_char =
|
|
|
|
get_opt_attr<std::string>(sym, "wrap_character");
|
|
|
|
if (wrap_char && (*wrap_char).size() > 0)
|
|
|
|
{
|
|
|
|
shield_symbol.set_wrap_char((*wrap_char)[0]);
|
|
|
|
}
|
|
|
|
|
|
|
|
// text conversion before rendering
|
|
|
|
text_convert_e tconvert =
|
|
|
|
get_attr<text_convert_e>(sym, "text_convert", NONE);
|
|
|
|
shield_symbol.set_text_convert(tconvert);
|
|
|
|
|
|
|
|
// spacing between text lines
|
|
|
|
optional<unsigned> line_spacing = get_opt_attr<unsigned>(sym, "line_spacing");
|
|
|
|
if (line_spacing)
|
|
|
|
{
|
|
|
|
shield_symbol.set_line_spacing(*line_spacing);
|
|
|
|
}
|
|
|
|
|
|
|
|
// spacing between characters in text
|
|
|
|
optional<unsigned> character_spacing = get_opt_attr<unsigned>(sym, "character_spacing");
|
|
|
|
if (character_spacing)
|
|
|
|
{
|
|
|
|
shield_symbol.set_character_spacing(*character_spacing);
|
|
|
|
}
|
|
|
|
|
|
|
|
// opacity
|
|
|
|
optional<double> opacity =
|
|
|
|
get_opt_attr<double>(sym, "opacity");
|
|
|
|
if (opacity)
|
|
|
|
{
|
|
|
|
shield_symbol.set_opacity( * opacity );
|
|
|
|
}
|
|
|
|
|
|
|
|
// unlock_image
|
|
|
|
optional<boolean> unlock_image =
|
|
|
|
get_opt_attr<boolean>(sym, "unlock_image");
|
|
|
|
if (unlock_image)
|
|
|
|
{
|
|
|
|
shield_symbol.set_unlock_image( * unlock_image );
|
|
|
|
}
|
|
|
|
|
|
|
|
// no text
|
|
|
|
optional<boolean> no_text =
|
|
|
|
get_opt_attr<boolean>(sym, "no_text");
|
|
|
|
if (no_text)
|
|
|
|
{
|
|
|
|
shield_symbol.set_no_text( * no_text );
|
|
|
|
}
|
|
|
|
|
2007-09-25 20:47:12 +02:00
|
|
|
rule.append(shield_symbol);
|
|
|
|
}
|
|
|
|
catch (ImageReaderException const & ex )
|
|
|
|
{
|
2007-12-17 15:21:04 +01:00
|
|
|
string msg("Failed to load image file '" + image_file +
|
2007-09-25 20:47:12 +02:00
|
|
|
"': " + ex.what());
|
2007-12-17 15:21:04 +01:00
|
|
|
if (strict_)
|
|
|
|
{
|
|
|
|
throw config_error(msg);
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
clog << "### WARNING: " << msg << endl;
|
|
|
|
}
|
2007-09-25 20:47:12 +02:00
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2007-09-25 20:47:12 +02:00
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
catch (const config_error & ex)
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
|
|
|
ex.append_context("in ShieldSymbolizer");
|
|
|
|
throw;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void map_parser::parse_line_symbolizer( rule_type & rule, ptree const & sym )
|
|
|
|
{
|
|
|
|
try
|
|
|
|
{
|
|
|
|
stroke strk;
|
|
|
|
ptree::const_iterator cssIter = sym.begin();
|
|
|
|
ptree::const_iterator endCss = sym.end();
|
|
|
|
|
|
|
|
for(; cssIter != endCss; ++cssIter)
|
|
|
|
{
|
2009-01-18 00:53:04 +01:00
|
|
|
ptree::value_type const& css_tag = *cssIter;
|
2007-09-25 20:47:12 +02:00
|
|
|
ptree const & css = cssIter->second;
|
2009-01-18 00:53:04 +01:00
|
|
|
|
|
|
|
if (css_tag.first == "CssParameter")
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
2009-01-18 00:53:04 +01:00
|
|
|
std::string css_name = get_attr<string>(css, "name");
|
|
|
|
if (css_name == "stroke")
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
2009-01-18 00:53:04 +01:00
|
|
|
color c = get_css<color>(css, css_name);
|
|
|
|
strk.set_color(c);
|
|
|
|
}
|
|
|
|
else if (css_name == "stroke-width")
|
|
|
|
{
|
|
|
|
float width = get_css<float>(css, css_name);
|
|
|
|
strk.set_width(width);
|
|
|
|
}
|
|
|
|
else if (css_name == "stroke-opacity")
|
|
|
|
{
|
|
|
|
float opacity = get_css<float>(css, css_name);
|
|
|
|
strk.set_opacity(opacity);
|
|
|
|
}
|
|
|
|
else if (css_name == "stroke-linejoin")
|
|
|
|
{
|
|
|
|
line_join_e line_join = get_css<line_join_e>(css, css_name);
|
|
|
|
strk.set_line_join( line_join );
|
2007-09-25 20:47:12 +02:00
|
|
|
}
|
2009-01-18 00:53:04 +01:00
|
|
|
else if (css_name == "stroke-linecap")
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
2009-01-18 00:53:04 +01:00
|
|
|
line_cap_e line_cap = get_css<line_cap_e>(css, css_name);
|
|
|
|
strk.set_line_cap( line_cap );
|
|
|
|
}
|
|
|
|
else if (css_name == "stroke-dasharray")
|
|
|
|
{
|
|
|
|
tokenizer<> tok ( css.data() );
|
|
|
|
std::vector<float> dash_array;
|
|
|
|
tokenizer<>::iterator itr = tok.begin();
|
|
|
|
for (; itr != tok.end(); ++itr)
|
|
|
|
{
|
|
|
|
try
|
2006-10-03 10:39:43 +02:00
|
|
|
{
|
2009-01-18 00:53:04 +01:00
|
|
|
float f = boost::lexical_cast<float>(*itr);
|
|
|
|
dash_array.push_back(f);
|
|
|
|
}
|
|
|
|
catch ( boost::bad_lexical_cast &)
|
|
|
|
{
|
|
|
|
throw config_error(std::string("Failed to parse CSS ") +
|
|
|
|
"parameter '" + css_name + "'. Expected a " +
|
|
|
|
"list of floats but got '" + css.data() + "'");
|
2006-10-03 10:39:43 +02:00
|
|
|
}
|
|
|
|
}
|
2009-01-18 00:53:04 +01:00
|
|
|
if (dash_array.size())
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
2009-01-18 00:53:04 +01:00
|
|
|
size_t size = dash_array.size();
|
|
|
|
if ( size % 2)
|
|
|
|
{
|
|
|
|
for (size_t i=0; i < size ;++i)
|
|
|
|
{
|
|
|
|
dash_array.push_back(dash_array[i]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
std::vector<float>::const_iterator pos = dash_array.begin();
|
|
|
|
while (pos != dash_array.end())
|
|
|
|
{
|
|
|
|
strk.add_dash(*pos,*(pos + 1));
|
|
|
|
pos +=2;
|
|
|
|
}
|
2007-09-25 20:47:12 +02:00
|
|
|
}
|
2006-10-03 10:39:43 +02:00
|
|
|
}
|
2009-01-18 00:53:04 +01:00
|
|
|
else
|
|
|
|
{
|
|
|
|
throw config_error(std::string("Failed to parse unknown CSS ") +
|
|
|
|
"parameter '" + css_name + "'");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
else if (css_tag.first != "<xmlcomment>" &&
|
|
|
|
css_tag.first != "<xmlattr>" )
|
|
|
|
{
|
|
|
|
throw config_error(std::string("Unknown child node. ") +
|
|
|
|
"Expected 'CssParameter' but got '" + css_tag.first + "'");
|
2006-10-03 10:39:43 +02:00
|
|
|
}
|
|
|
|
}
|
2007-09-25 20:47:12 +02:00
|
|
|
rule.append(line_symbolizer(strk));
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
catch (const config_error & ex)
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
|
|
|
ex.append_context("in LineSymbolizer");
|
|
|
|
throw;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void map_parser::parse_polygon_symbolizer( rule_type & rule, ptree const & sym )
|
|
|
|
{
|
|
|
|
try
|
|
|
|
{
|
|
|
|
polygon_symbolizer poly_sym;
|
|
|
|
|
|
|
|
ptree::const_iterator cssIter = sym.begin();
|
|
|
|
ptree::const_iterator endCss = sym.end();
|
|
|
|
|
|
|
|
for(; cssIter != endCss; ++cssIter)
|
|
|
|
{
|
2009-01-18 00:53:04 +01:00
|
|
|
ptree::value_type const& css_tag = *cssIter;
|
2007-09-25 20:47:12 +02:00
|
|
|
ptree const & css = cssIter->second;
|
2009-01-18 00:53:04 +01:00
|
|
|
|
|
|
|
if (css_tag.first == "CssParameter")
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
2009-01-18 00:53:04 +01:00
|
|
|
std::string css_name = get_attr<string>(css, "name");
|
|
|
|
if (css_name == "fill")
|
|
|
|
{
|
|
|
|
color c = get_css<color>(css, css_name);
|
|
|
|
poly_sym.set_fill(c);
|
|
|
|
}
|
|
|
|
else if (css_name == "fill-opacity")
|
|
|
|
{
|
|
|
|
float opacity = get_css<float>(css, css_name);
|
|
|
|
poly_sym.set_opacity(opacity);
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
throw config_error(std::string("Failed to parse unknown CSS ") +
|
|
|
|
"parameter '" + css_name + "'");
|
|
|
|
}
|
2007-09-25 20:47:12 +02:00
|
|
|
}
|
2009-01-18 00:53:04 +01:00
|
|
|
else if (css_tag.first != "<xmlcomment>" &&
|
|
|
|
css_tag.first != "<xmlattr>" )
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
2009-01-18 00:53:04 +01:00
|
|
|
throw config_error(std::string("Unknown child node. ") +
|
|
|
|
"Expected 'CssParameter' but got '" + css_tag.first + "'");
|
2007-09-25 20:47:12 +02:00
|
|
|
}
|
|
|
|
}
|
|
|
|
rule.append(poly_sym);
|
|
|
|
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
catch (const config_error & ex)
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
|
|
|
ex.append_context("in PolygonSymbolizer");
|
|
|
|
throw;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
void map_parser::parse_building_symbolizer( rule_type & rule, ptree const & sym )
|
|
|
|
{
|
|
|
|
try {
|
|
|
|
building_symbolizer building_sym;
|
|
|
|
|
|
|
|
ptree::const_iterator cssIter = sym.begin();
|
|
|
|
ptree::const_iterator endCss = sym.end();
|
|
|
|
|
|
|
|
for(; cssIter != endCss; ++cssIter)
|
|
|
|
{
|
2009-01-18 00:53:04 +01:00
|
|
|
ptree::value_type const& css_tag = *cssIter;
|
|
|
|
ptree const & css = cssIter->second;
|
2007-09-25 20:47:12 +02:00
|
|
|
|
2009-01-18 00:53:04 +01:00
|
|
|
if (css_tag.first == "CssParameter")
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
2009-01-18 00:53:04 +01:00
|
|
|
std::string css_name = get_attr<string>(css, "name");
|
|
|
|
std::string data = css.data();
|
|
|
|
if (css_name == "fill")
|
|
|
|
{
|
|
|
|
color c = get_css<color>(css, css_name);
|
|
|
|
building_sym.set_fill(c);
|
|
|
|
}
|
|
|
|
else if (css_name == "fill-opacity")
|
|
|
|
{
|
|
|
|
float opacity = get_css<float>(css, css_name);
|
|
|
|
building_sym.set_opacity(opacity);
|
|
|
|
}
|
|
|
|
else if (css_name == "height")
|
|
|
|
{
|
|
|
|
float height = get_css<float>(css,css_name);
|
|
|
|
building_sym.set_height(height);
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
throw config_error(std::string("Failed to parse unknown CSS ") +
|
|
|
|
"parameter '" + css_name + "'");
|
|
|
|
}
|
2007-09-25 20:47:12 +02:00
|
|
|
}
|
2009-01-18 00:53:04 +01:00
|
|
|
else if (css_tag.first != "<xmlcomment>" &&
|
|
|
|
css_tag.first != "<xmlattr>" )
|
2007-10-05 13:27:00 +02:00
|
|
|
{
|
2009-01-18 00:53:04 +01:00
|
|
|
throw config_error(std::string("Unknown child node. ") +
|
|
|
|
"Expected 'CssParameter' but got '" + css_tag.first + "'");
|
2007-10-05 13:27:00 +02:00
|
|
|
}
|
2007-09-25 20:47:12 +02:00
|
|
|
}
|
|
|
|
rule.append(building_sym);
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
catch (const config_error & ex)
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
|
|
|
ex.append_context("in BuildingSymbolizer");
|
|
|
|
throw;
|
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
}
|
2007-09-25 20:47:12 +02:00
|
|
|
|
2009-03-29 13:05:20 +02:00
|
|
|
void map_parser::parse_raster_symbolizer( rule_type & rule, ptree const & sym )
|
|
|
|
{
|
|
|
|
try
|
|
|
|
{
|
|
|
|
raster_symbolizer raster_sym;
|
|
|
|
|
|
|
|
ptree::const_iterator cssIter = sym.begin();
|
|
|
|
ptree::const_iterator endCss = sym.end();
|
|
|
|
|
|
|
|
for(; cssIter != endCss; ++cssIter)
|
|
|
|
{
|
|
|
|
ptree::value_type const& css_tag = *cssIter;
|
|
|
|
ptree const & css = cssIter->second;
|
|
|
|
|
|
|
|
if (css_tag.first == "CssParameter")
|
|
|
|
{
|
|
|
|
std::string css_name = get_attr<string>(css, "name");
|
|
|
|
if (css_name == "mode")
|
|
|
|
{
|
|
|
|
raster_sym.set_mode(get_css<string>(css, css_name));
|
|
|
|
}
|
|
|
|
else if (css_name == "scaling")
|
|
|
|
{
|
|
|
|
raster_sym.set_scaling(get_css<string>(css, css_name));
|
|
|
|
}
|
|
|
|
else if (css_name == "opacity")
|
|
|
|
{
|
|
|
|
float opacity = get_css<float>(css, css_name);
|
|
|
|
raster_sym.set_opacity(opacity);
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
throw config_error(std::string("Failed to parse unknown CSS ") +
|
|
|
|
"parameter '" + css_name + "'");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
else if (css_tag.first != "<xmlcomment>" &&
|
|
|
|
css_tag.first != "<xmlattr>" )
|
|
|
|
{
|
|
|
|
throw config_error(std::string("Unknown child node. ") +
|
|
|
|
"Expected 'CssParameter' but got '" + css_tag.first + "'");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
rule.append(raster_sym);
|
|
|
|
}
|
|
|
|
catch (const config_error & ex)
|
|
|
|
{
|
|
|
|
ex.append_context("in RasterSymbolizer");
|
|
|
|
throw;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2008-06-29 12:58:48 +02:00
|
|
|
void map_parser::ensure_font_face( const std::string & face_name )
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
2008-06-29 12:58:48 +02:00
|
|
|
if ( ! font_manager_.get_face( face_name ) )
|
2007-09-25 20:47:12 +02:00
|
|
|
{
|
|
|
|
throw config_error("Failed to find font face '" +
|
2008-06-29 12:58:48 +02:00
|
|
|
face_name + "'");
|
2006-10-03 10:39:43 +02:00
|
|
|
}
|
2007-09-25 20:47:12 +02:00
|
|
|
}
|
Patch from David Eastcott :
1. Modified Text Symbolizer
a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur).
b) adjusted vertical alignment calculation so that:
i) middle -> has the center of the text line(s) at the point origin
ii) bottom -> has the text line(s) below the point origin
iii) top -> has the text line(s) above the point origin
c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false
allows line breaks at first wrap_char before wrap_width as an alternative to the original
which was to create the line break at the first wrap_char after wrap_width
d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle
i) left -> has all text line(s) to left of the point origin
ii) middle -> has all text line(s) centered on the the point origin
iii) right -> has all text line(s) to the right of the point origin
NOTE: dx, dy position adjustments are applied after alignments and before Justify.
e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle
i) left -> after alignments, has all text line(s) are left justified (left to right reading)
ii) middle -> after alignments, has all text line(s) center justified
iii) right -> after alignments, has all text line(s) right justified (right to left reading)
f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque
g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper
centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping
occurs. Line spacing is uniform and consistent and compensates for errors between text_size and
the actual size (ci.height is inconsistent, depending on case and character); fixes issue with
multi-line text where some lines have a slight gap and others are compressed together.
2. Modified shield_symbolizer
a) added the attributes:
i) allow_overlap
ii) vertical_alignment
iii) horizontal_alignment
iv) justify_alignment
v) wrap_width
vi) wrap_character
vii) wrap_before
viii) text_convert
ix) line_spacing
x) character_spacing
xi) opacity
b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false
i) false == image and text placement behaviour same as before
ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes,
dx/dy only affect text.
Allows user to create point markers with text, but both the text and image rendering collision detection are done
as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the
other are omitted due to overlaps, but not both)
c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer
Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry
d) ensured that the text placement was not updating the detector unless a shield image was actually placed.
e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false
When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used
and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
|
|
|
|
2009-05-01 03:59:01 +02:00
|
|
|
std::string map_parser::ensure_relative_to_xml( boost::optional<std::string> opt_path )
|
|
|
|
{
|
|
|
|
boost::filesystem::path xml_path = filename_;
|
|
|
|
boost::filesystem::path rel_path = *opt_path;
|
|
|
|
if ( !rel_path.has_root_path() ) {
|
|
|
|
boost::filesystem::path full = boost::filesystem::complete(xml_path.branch_path()/rel_path).normalize();
|
|
|
|
#ifdef MAPNIK_DEBUG
|
|
|
|
std::clog << "\nModifying relative paths to be relative to xml...\n";
|
|
|
|
std::clog << "original base path: " << *opt_path << "\n";
|
|
|
|
std::clog << "relative base path: " << full.string() << "\n";
|
|
|
|
#endif
|
|
|
|
return full.string();
|
|
|
|
}
|
|
|
|
return *opt_path;
|
|
|
|
}
|
|
|
|
|
2007-09-25 20:47:12 +02:00
|
|
|
} // end of namespace mapnik
|