mapnik/src/agg/agg_renderer.cpp

465 lines
16 KiB
C++
Raw Normal View History

2006-03-31 12:32:02 +02:00
/*****************************************************************************
Patch from David Eastcott : 1. Modified Text Symbolizer a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur). b) adjusted vertical alignment calculation so that: i) middle -> has the center of the text line(s) at the point origin ii) bottom -> has the text line(s) below the point origin iii) top -> has the text line(s) above the point origin c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false allows line breaks at first wrap_char before wrap_width as an alternative to the original which was to create the line break at the first wrap_char after wrap_width d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle i) left -> has all text line(s) to left of the point origin ii) middle -> has all text line(s) centered on the the point origin iii) right -> has all text line(s) to the right of the point origin NOTE: dx, dy position adjustments are applied after alignments and before Justify. e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle i) left -> after alignments, has all text line(s) are left justified (left to right reading) ii) middle -> after alignments, has all text line(s) center justified iii) right -> after alignments, has all text line(s) right justified (right to left reading) f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping occurs. Line spacing is uniform and consistent and compensates for errors between text_size and the actual size (ci.height is inconsistent, depending on case and character); fixes issue with multi-line text where some lines have a slight gap and others are compressed together. 2. Modified shield_symbolizer a) added the attributes: i) allow_overlap ii) vertical_alignment iii) horizontal_alignment iv) justify_alignment v) wrap_width vi) wrap_character vii) wrap_before viii) text_convert ix) line_spacing x) character_spacing xi) opacity b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false i) false == image and text placement behaviour same as before ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes, dx/dy only affect text. Allows user to create point markers with text, but both the text and image rendering collision detection are done as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the other are omitted due to overlaps, but not both) c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry d) ensured that the text placement was not updating the detector unless a shield image was actually placed. e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
*
2006-03-31 12:32:02 +02:00
* This file is part of Mapnik (c++ mapping toolkit)
*
* Copyright (C) 2011 Artem Pavlenko
*
2006-03-31 12:32:02 +02:00
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
2006-03-31 12:32:02 +02:00
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
2006-03-31 12:32:02 +02:00
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
2006-03-31 12:32:02 +02:00
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*****************************************************************************/
2007-10-08 19:42:41 +02:00
// mapnik
#include <mapnik/agg_renderer.hpp>
#include <mapnik/agg_rasterizer.hpp>
2012-03-28 13:02:03 +02:00
#include <mapnik/agg_helpers.hpp>
#include <mapnik/graphics.hpp>
#include <mapnik/debug.hpp>
#include <mapnik/layer.hpp>
#include <mapnik/feature_type_style.hpp>
#include <mapnik/marker.hpp>
#include <mapnik/marker_cache.hpp>
2007-10-08 19:42:41 +02:00
#include <mapnik/unicode.hpp>
#include <mapnik/font_set.hpp>
2010-06-18 17:39:32 +02:00
#include <mapnik/parse_path.hpp>
2012-01-20 22:43:05 +01:00
#include <mapnik/map.hpp>
#include <mapnik/svg/svg_converter.hpp>
#include <mapnik/svg/svg_renderer_agg.hpp>
#include <mapnik/svg/svg_path_adapter.hpp>
#include <mapnik/image_compositing.hpp>
2012-05-04 11:23:49 +02:00
#include <mapnik/image_filter.hpp>
#include <mapnik/image_util.hpp>
// agg
2008-06-29 12:58:29 +02:00
#define AGG_RENDERING_BUFFER row_ptr_cache<int8u>
2008-02-05 14:58:47 +01:00
#include "agg_rendering_buffer.h"
#include "agg_pixfmt_rgba.h"
#include "agg_scanline_u.h"
#include "agg_image_filters.h"
#include "agg_trans_bilinear.h"
#include "agg_span_allocator.h"
#include "agg_image_accessors.h"
#include "agg_span_image_filter_rgba.h"
2007-10-08 19:42:41 +02:00
// boost
#include <boost/utility.hpp>
#include <boost/make_shared.hpp>
#include <boost/math/special_functions/round.hpp>
2007-10-08 19:42:41 +02:00
// stl
#include <cmath>
Patch from David Eastcott : 1. Modified Text Symbolizer a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur). b) adjusted vertical alignment calculation so that: i) middle -> has the center of the text line(s) at the point origin ii) bottom -> has the text line(s) below the point origin iii) top -> has the text line(s) above the point origin c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false allows line breaks at first wrap_char before wrap_width as an alternative to the original which was to create the line break at the first wrap_char after wrap_width d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle i) left -> has all text line(s) to left of the point origin ii) middle -> has all text line(s) centered on the the point origin iii) right -> has all text line(s) to the right of the point origin NOTE: dx, dy position adjustments are applied after alignments and before Justify. e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle i) left -> after alignments, has all text line(s) are left justified (left to right reading) ii) middle -> after alignments, has all text line(s) center justified iii) right -> after alignments, has all text line(s) right justified (right to left reading) f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping occurs. Line spacing is uniform and consistent and compensates for errors between text_size and the actual size (ci.height is inconsistent, depending on case and character); fixes issue with multi-line text where some lines have a slight gap and others are compressed together. 2. Modified shield_symbolizer a) added the attributes: i) allow_overlap ii) vertical_alignment iii) horizontal_alignment iv) justify_alignment v) wrap_width vi) wrap_character vii) wrap_before viii) text_convert ix) line_spacing x) character_spacing xi) opacity b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false i) false == image and text placement behaviour same as before ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes, dx/dy only affect text. Allows user to create point markers with text, but both the text and image rendering collision detection are done as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the other are omitted due to overlaps, but not both) c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry d) ensured that the text placement was not updating the detector unless a shield image was actually placed. e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
namespace mapnik
{
2009-12-16 21:02:06 +01:00
template <typename T>
agg_renderer<T>::agg_renderer(Map const& m, T & pixmap, double scale_factor, unsigned offset_x, unsigned offset_y)
: feature_style_processor<agg_renderer>(m, scale_factor),
2009-12-16 21:02:06 +01:00
pixmap_(pixmap),
internal_buffer_(),
current_buffer_(&pixmap),
style_level_compositing_(false),
2009-12-16 21:02:06 +01:00
width_(pixmap_.width()),
height_(pixmap_.height()),
scale_factor_(scale_factor),
2010-06-25 17:23:35 +02:00
t_(m.width(),m.height(),m.get_current_extent(),offset_x,offset_y),
2009-12-16 21:02:06 +01:00
font_engine_(),
font_manager_(font_engine_),
detector_(boost::make_shared<label_collision_detector4>(box2d<double>(-m.buffer_size(), -m.buffer_size(), m.width() + m.buffer_size() ,m.height() + m.buffer_size()))),
2009-12-16 21:02:06 +01:00
ras_ptr(new rasterizer)
{
2012-02-02 02:48:56 +01:00
setup(m);
}
template <typename T>
agg_renderer<T>::agg_renderer(Map const& m, T & pixmap, boost::shared_ptr<label_collision_detector4> detector,
double scale_factor, unsigned offset_x, unsigned offset_y)
: feature_style_processor<agg_renderer>(m, scale_factor),
pixmap_(pixmap),
internal_buffer_(),
current_buffer_(&pixmap),
style_level_compositing_(false),
width_(pixmap_.width()),
height_(pixmap_.height()),
scale_factor_(scale_factor),
t_(m.width(),m.height(),m.get_current_extent(),offset_x,offset_y),
font_engine_(),
font_manager_(font_engine_),
detector_(detector),
ras_ptr(new rasterizer)
{
2012-02-02 02:48:56 +01:00
setup(m);
}
template <typename T>
2012-02-02 02:48:56 +01:00
void agg_renderer<T>::setup(Map const &m)
2009-12-16 21:02:06 +01:00
{
boost::optional<color> const& bg = m.background();
if (bg)
{
if (bg->alpha() < 255)
{
mapnik::color bg_color = *bg;
bg_color.premultiply();
pixmap_.set_background(bg_color);
}
else
{
pixmap_.set_background(*bg);
}
}
2012-02-02 02:48:56 +01:00
boost::optional<std::string> const& image_filename = m.background_image();
if (image_filename)
{
// NOTE: marker_cache returns premultiplied image, if needed
boost::optional<mapnik::marker_ptr> bg_marker = mapnik::marker_cache::instance().find(*image_filename,true);
if (bg_marker && (*bg_marker)->is_bitmap())
{
mapnik::image_ptr bg_image = *(*bg_marker)->get_bitmap_data();
int w = bg_image->width();
int h = bg_image->height();
if ( w > 0 && h > 0)
{
2010-07-19 13:10:20 +02:00
// repeat background-image both vertically and horizontally
unsigned x_steps = unsigned(std::ceil(width_/double(w)));
unsigned y_steps = unsigned(std::ceil(height_/double(h)));
for (unsigned x=0;x<x_steps;++x)
{
for (unsigned y=0;y<y_steps;++y)
{
composite(pixmap_.data(),*bg_image, src_over, 1.0f, x*w, y*h, false);
}
}
}
}
}
MAPNIK_LOG_DEBUG(agg_renderer) << "agg_renderer: Scale=" << m.scale();
2009-12-16 21:02:06 +01:00
}
Patch from David Eastcott : 1. Modified Text Symbolizer a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur). b) adjusted vertical alignment calculation so that: i) middle -> has the center of the text line(s) at the point origin ii) bottom -> has the text line(s) below the point origin iii) top -> has the text line(s) above the point origin c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false allows line breaks at first wrap_char before wrap_width as an alternative to the original which was to create the line break at the first wrap_char after wrap_width d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle i) left -> has all text line(s) to left of the point origin ii) middle -> has all text line(s) centered on the the point origin iii) right -> has all text line(s) to the right of the point origin NOTE: dx, dy position adjustments are applied after alignments and before Justify. e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle i) left -> after alignments, has all text line(s) are left justified (left to right reading) ii) middle -> after alignments, has all text line(s) center justified iii) right -> after alignments, has all text line(s) right justified (right to left reading) f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping occurs. Line spacing is uniform and consistent and compensates for errors between text_size and the actual size (ci.height is inconsistent, depending on case and character); fixes issue with multi-line text where some lines have a slight gap and others are compressed together. 2. Modified shield_symbolizer a) added the attributes: i) allow_overlap ii) vertical_alignment iii) horizontal_alignment iv) justify_alignment v) wrap_width vi) wrap_character vii) wrap_before viii) text_convert ix) line_spacing x) character_spacing xi) opacity b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false i) false == image and text placement behaviour same as before ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes, dx/dy only affect text. Allows user to create point markers with text, but both the text and image rendering collision detection are done as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the other are omitted due to overlaps, but not both) c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry d) ensured that the text placement was not updating the detector unless a shield image was actually placed. e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
2009-12-16 21:02:06 +01:00
template <typename T>
agg_renderer<T>::~agg_renderer() {}
2008-02-05 14:58:47 +01:00
2009-12-16 21:02:06 +01:00
template <typename T>
void agg_renderer<T>::start_map_processing(Map const& map)
{
MAPNIK_LOG_DEBUG(agg_renderer) << "agg_renderer: Start map processing bbox=" << map.get_current_extent();
ras_ptr->clip_box(0,0,width_,height_);
2009-12-16 21:02:06 +01:00
}
2009-12-16 21:02:06 +01:00
template <typename T>
void agg_renderer<T>::end_map_processing(Map const& )
{
agg::rendering_buffer buf(pixmap_.raw_data(),width_,height_, width_ * 4);
agg::pixfmt_rgba32 pixf(buf);
pixf.demultiply();
MAPNIK_LOG_DEBUG(agg_renderer) << "agg_renderer: End map processing";
2009-12-16 21:02:06 +01:00
}
Patch from David Eastcott : 1. Modified Text Symbolizer a) corrected line fragment centering (for 2nd and subsequent lines, when line breaks occur). b) adjusted vertical alignment calculation so that: i) middle -> has the center of the text line(s) at the point origin ii) bottom -> has the text line(s) below the point origin iii) top -> has the text line(s) above the point origin c) added new text_symbolizer attribute: 'wrap_before', value range: true/false, default == false allows line breaks at first wrap_char before wrap_width as an alternative to the original which was to create the line break at the first wrap_char after wrap_width d) added new text_symbolizer attribute: 'horizontal_alignment', value range: left/middle/right, default == middle i) left -> has all text line(s) to left of the point origin ii) middle -> has all text line(s) centered on the the point origin iii) right -> has all text line(s) to the right of the point origin NOTE: dx, dy position adjustments are applied after alignments and before Justify. e) added new text_symbolizer attribute: 'justify_alignment', value range: left/middle/right, default == middle i) left -> after alignments, has all text line(s) are left justified (left to right reading) ii) middle -> after alignments, has all text line(s) center justified iii) right -> after alignments, has all text line(s) right justified (right to left reading) f) added new text_symbolizer attribute: 'opacity', value range: 0.0 thru 1.0; 1.0 == fully opaque g) modified positioning to compensate for both line_spacing and character_spacing, to ensure proper centering of the text envelope. Also ensure that centering occurs correctly even if no wrapping occurs. Line spacing is uniform and consistent and compensates for errors between text_size and the actual size (ci.height is inconsistent, depending on case and character); fixes issue with multi-line text where some lines have a slight gap and others are compressed together. 2. Modified shield_symbolizer a) added the attributes: i) allow_overlap ii) vertical_alignment iii) horizontal_alignment iv) justify_alignment v) wrap_width vi) wrap_character vii) wrap_before viii) text_convert ix) line_spacing x) character_spacing xi) opacity b) added new shield_symbolizer attribute: 'unlock_image', value range: true/false, default == false i) false == image and text placement behaviour same as before ii) true == image placement independant of text, image is always centered at geometry point, text placed per attributes, dx/dy only affect text. Allows user to create point markers with text, but both the text and image rendering collision detection are done as a pair (they come and go together - solves problem if using point_symbolizer and text_symbolizers where one or the other are omitted due to overlaps, but not both) c) extended choices for the attribute 'placement' to include vertex; effect is limited to the shield_symbolizer Allows an attempted placement at every vertex available, gives additional shield placement volume when using line geometry d) ensured that the text placement was not updating the detector unless a shield image was actually placed. e) added new shield_symbolizer attribute: 'no_text', value range: true/false, default = false When set true, the text for the feature is ignored ('space' subsituted) so that pure graphic symbols can be used and no text is rendered over top of them.
2009-10-19 15:52:53 +02:00
2009-12-16 21:02:06 +01:00
template <typename T>
void agg_renderer<T>::start_layer_processing(layer const& lay, box2d<double> const& query_extent)
2009-12-16 21:02:06 +01:00
{
MAPNIK_LOG_DEBUG(agg_renderer) << "agg_renderer: Start processing layer=" << lay.name();
MAPNIK_LOG_DEBUG(agg_renderer) << "agg_renderer: -- datasource=" << lay.datasource().get();
MAPNIK_LOG_DEBUG(agg_renderer) << "agg_renderer: -- query_extent=" << query_extent;
2009-12-16 21:02:06 +01:00
if (lay.clear_label_cache())
{
detector_->clear();
2009-12-16 21:02:06 +01:00
}
query_extent_ = query_extent;
int buffer_size = lay.buffer_size();
if (buffer_size != 0 )
{
double padding = buffer_size * (double)(query_extent.width()/pixmap_.width());
query_extent_.pad(padding);
}
boost::optional<box2d<double> > const& maximum_extent = lay.maximum_extent();
if (maximum_extent)
{
query_extent_.clip(*maximum_extent);
}
2009-12-16 21:02:06 +01:00
}
template <typename T>
void agg_renderer<T>::end_layer_processing(layer const&)
{
MAPNIK_LOG_DEBUG(agg_renderer) << "agg_renderer: End layer processing";
2009-12-16 21:02:06 +01:00
}
template <typename T>
void agg_renderer<T>::start_style_processing(feature_type_style const& st)
{
MAPNIK_LOG_DEBUG(agg_renderer) << "agg_renderer: Start processing style";
if (st.comp_op() || st.image_filters().size() > 0 || st.get_opacity() < 1)
{
style_level_compositing_ = true;
}
else
{
style_level_compositing_ = false;
}
if (style_level_compositing_)
{
if (!internal_buffer_)
{
internal_buffer_ = boost::make_shared<buffer_type>(pixmap_.width(),pixmap_.height());
}
else
{
internal_buffer_->set_background(color(0,0,0,0)); // fill with transparent colour
}
current_buffer_ = internal_buffer_.get();
}
else
{
current_buffer_ = &pixmap_;
}
}
template <typename T>
void agg_renderer<T>::end_style_processing(feature_type_style const& st)
{
if (style_level_compositing_)
{
bool blend_from = false;
if (st.image_filters().size() > 0)
{
blend_from = true;
mapnik::filter::filter_visitor<image_32> visitor(*current_buffer_);
BOOST_FOREACH(mapnik::filter::filter_type const& filter_tag, st.image_filters())
{
boost::apply_visitor(visitor, filter_tag);
}
}
if (st.comp_op())
{
composite(pixmap_.data(),current_buffer_->data(), *st.comp_op(), st.get_opacity(), 0, 0, false);
}
else if (blend_from || st.get_opacity() < 1)
{
composite(pixmap_.data(),current_buffer_->data(), src_over, st.get_opacity(), 0, 0, false);
}
// apply any 'direct' image filters
mapnik::filter::filter_visitor<image_32> visitor(pixmap_);
BOOST_FOREACH(mapnik::filter::filter_type const& filter_tag, st.direct_image_filters())
2012-04-18 13:14:23 +02:00
{
boost::apply_visitor(visitor, filter_tag);
}
}
MAPNIK_LOG_DEBUG(agg_renderer) << "agg_renderer: End processing style";
}
template <typename T>
void agg_renderer<T>::render_marker(pixel_position const& pos,
marker const& marker,
agg::trans_affine const& tr,
double opacity,
composite_mode_e comp_op)
{
typedef agg::rgba8 color_type;
typedef agg::order_rgba order_type;
typedef agg::pixel32_type pixel_type;
typedef agg::comp_op_adaptor_rgba<color_type, order_type> blender_type; // comp blender
typedef agg::pixfmt_custom_blend_rgba<blender_type, agg::rendering_buffer> pixfmt_comp_type;
typedef agg::renderer_base<pixfmt_comp_type> renderer_base;
typedef agg::renderer_scanline_aa_solid<renderer_base> renderer_type;
typedef agg::pod_bvector<mapnik::svg::path_attributes> svg_attribute_type;
ras_ptr->reset();
ras_ptr->gamma(agg::gamma_power());
agg::scanline_u8 sl;
agg::rendering_buffer buf(current_buffer_->raw_data(), width_, height_, width_ * 4);
pixfmt_comp_type pixf(buf);
pixf.comp_op(static_cast<agg::comp_op_e>(comp_op));
renderer_base renb(pixf);
if (marker.is_vector())
{
box2d<double> const& bbox = (*marker.get_vector_data())->bounding_box();
coord<double,2> c = bbox.center();
// center the svg marker on '0,0'
agg::trans_affine mtx = agg::trans_affine_translation(-c.x,-c.y);
// apply symbol transformation to get to map space
mtx *= tr;
mtx *= agg::trans_affine_scaling(scale_factor_);
// render the marker at the center of the marker box
mtx.translate(pos.x, pos.y);
using namespace mapnik::svg;
vertex_stl_adapter<svg_path_storage> stl_storage((*marker.get_vector_data())->source());
svg_path_adapter svg_path(stl_storage);
svg_renderer_agg<svg_path_adapter,
svg_attribute_type,
renderer_type,
pixfmt_comp_type> svg_renderer(svg_path,
2012-02-02 02:48:56 +01:00
(*marker.get_vector_data())->attributes());
svg_renderer.render(*ras_ptr, sl, renb, mtx, opacity, bbox);
}
else
{
double width = (*marker.get_bitmap_data())->width();
double height = (*marker.get_bitmap_data())->height();
double cx = 0.5 * width;
double cy = 0.5 * height;
if (std::fabs(1.0 - scale_factor_) < 0.001 && tr.is_identity())
{
composite(current_buffer_->data(), **marker.get_bitmap_data(),
comp_op, opacity,
boost::math::iround(pos.x - cx),
boost::math::iround(pos.y - cy),
false);
}
else
{
double p[8];
double x0 = pos.x - 0.5 * width;
double y0 = pos.y - 0.5 * height;
p[0] = x0; p[1] = y0;
p[2] = x0 + width; p[3] = y0;
p[4] = x0 + width; p[5] = y0 + height;
p[6] = x0; p[7] = y0 + height;
agg::trans_affine marker_tr;
marker_tr *= agg::trans_affine_translation(-pos.x,-pos.y);
marker_tr *= tr;
marker_tr *= agg::trans_affine_scaling(scale_factor_);
marker_tr *= agg::trans_affine_translation(pos.x,pos.y);
marker_tr.transform(&p[0], &p[1]);
marker_tr.transform(&p[2], &p[3]);
marker_tr.transform(&p[4], &p[5]);
marker_tr.transform(&p[6], &p[7]);
ras_ptr->move_to_d(p[0],p[1]);
ras_ptr->line_to_d(p[2],p[3]);
ras_ptr->line_to_d(p[4],p[5]);
ras_ptr->line_to_d(p[6],p[7]);
agg::span_allocator<color_type> sa;
agg::image_filter_bilinear filter_kernel;
agg::image_filter_lut filter(filter_kernel, false);
image_data_32 const& src = **marker.get_bitmap_data();
agg::rendering_buffer marker_buf((unsigned char *)src.getBytes(),
src.width(),
src.height(),
src.width()*4);
agg::pixfmt_rgba32_pre pixf(marker_buf);
typedef agg::image_accessor_clone<agg::pixfmt_rgba32_pre> img_accessor_type;
typedef agg::span_interpolator_linear<agg::trans_affine> interpolator_type;
typedef agg::span_image_filter_rgba_2x2<img_accessor_type,
interpolator_type> span_gen_type;
typedef agg::renderer_scanline_aa_alpha<renderer_base,
agg::span_allocator<agg::rgba8>,
span_gen_type> renderer_type;
img_accessor_type ia(pixf);
interpolator_type interpolator(agg::trans_affine(p, 0, 0, width, height) );
span_gen_type sg(ia, interpolator, filter);
renderer_type rp(renb,sa, sg, unsigned(opacity*255));
agg::render_scanlines(*ras_ptr, sl, rp);
}
}
}
template <typename T>
void agg_renderer<T>::painted(bool painted)
{
pixmap_.painted(painted);
}
template <typename T>
void agg_renderer<T>::debug_draw_box(box2d<double> const& box,
double x, double y, double angle)
{
agg::rendering_buffer buf(pixmap_.raw_data(), width_, height_, width_ * 4);
debug_draw_box(buf, box, x, y, angle);
}
template <typename T> template <typename R>
void agg_renderer<T>::debug_draw_box(R& buf, box2d<double> const& box,
double x, double y, double angle)
{
typedef agg::pixfmt_rgba32 pixfmt;
typedef agg::renderer_base<pixfmt> renderer_base;
typedef agg::renderer_scanline_aa_solid<renderer_base> renderer_type;
agg::scanline_p8 sl_line;
pixfmt pixf(buf);
renderer_base renb(pixf);
renderer_type ren(renb);
// compute tranformation matrix
agg::trans_affine tr = agg::trans_affine_rotation(angle).translate(x, y);
// prepare path
agg::path_storage pbox;
pbox.start_new_path();
pbox.move_to(box.minx(), box.miny());
pbox.line_to(box.maxx(), box.miny());
pbox.line_to(box.maxx(), box.maxy());
pbox.line_to(box.minx(), box.maxy());
pbox.line_to(box.minx(), box.miny());
// prepare stroke with applied transformation
typedef agg::conv_transform<agg::path_storage> conv_transform;
typedef agg::conv_stroke<conv_transform> conv_stroke;
conv_transform tbox(pbox, tr);
conv_stroke sbox(tbox);
sbox.generator().width(1.0 * scale_factor_);
// render the outline
ras_ptr->reset();
ras_ptr->add_path(sbox);
ren.color(agg::rgba8(0x33, 0x33, 0xff, 0xcc)); // blue is fine
agg::render_scanlines(*ras_ptr, sl_line, ren);
}
2012-08-02 01:40:48 +02:00
template <typename T>
void agg_renderer<T>::draw_geo_extent(box2d<double> const& extent, mapnik::color const& color)
{
box2d<double> box = t_.forward(extent);
double x0 = box.minx();
double x1 = box.maxx();
double y0 = box.miny();
double y1 = box.maxy();
unsigned rgba = color.rgba();
for (double x=x0; x<x1; x++)
{
pixmap_.setPixel(x, y0, rgba);
pixmap_.setPixel(x, y1, rgba);
}
for (double y=y0; y<y1; y++)
{
pixmap_.setPixel(x0, y, rgba);
pixmap_.setPixel(x1, y, rgba);
}
}
2009-12-16 21:02:06 +01:00
template class agg_renderer<image_32>;
template void agg_renderer<image_32>::debug_draw_box<agg::rendering_buffer>(
agg::rendering_buffer& buf,
box2d<double> const& box,
double x, double y, double angle);
}